The application of WCT pyrolysis oil as a combustion modifier also contributed to the reduction or even the almost complete elimination of unburnt carbon content in the ash residue formed after anthracite combustion. With an increase in the mass fraction of the additive, the rate of combustion front propagation was increased. For samples with more than 10 wt % pyrolysis oil additive, the formation of a visible flame was observed near the sample surface. The high-speed video recording indicated that the combustion of both initial and modified with 5 wt % pyrolysis oil anthracite samples was realized in oxidation mode. The application of WCT pyrolysis oil as a combustion modifier contributed to an increase in the reactivity of anthracite, which was expressed in a decrease in the minimum ignition temperature (by 23вЂ“104 вЊ) and a reduction in the ignition delay time. The gas-phase combustion products were analyzed using an in-line gas analyzer. Ignition and combustion of obtained samples were carried out in a combustion chamber at temperatures of the heating medium T g = 600вЂ“800 вЊ. The additive was applied by the drop impregnation method. Since you can effortlessly enhance the audios you can also effortlessly analyze the audios, therefore, for this task, you can break the sounds into. The mass fraction of WCT pyrolysis oil was varied in the range from 5 to 30 wt %. You can effortlessly edit it the way you like and because of the great features of this application, you will be capable of improving the audios that you created. The ignition and combustion of anthracite modified by the addition of pyrolysis oil obtained during thermal processing of waste car tires (WCTs) had been studied.

Download anthracite for serum